industrial control

When the motor starts, it must overcome its own inertia and at the same time overcome the reaction force of the load.

Category:

Applications

Product Inquiry

Product description

When the motor starts, it must overcome its own inertia and at the same time overcome the reaction force of the load. Therefore, a larger current and torque are required when the motor starts. Connect the PTC thermistor in series with the start auxiliary coil. After the start, the PTC thermistor enters a high resistance state and cuts off the auxiliary coil. This effect can be achieved.

Related products

M10*1.5mm Stainless Steel Probe PT1000 PT100 Rtd Cu50 Temperature Sensor

K-Type Thermocouple Simple Temperature Probe Pin Temperature Sensing Line Customizable PT100 Temperature Sensor

Customizable 4-Wire Tube 3*30mm Class B PT100 Temperature Sensor with OEM & ODM Support

Customizable K-Type/E-Type/PT100/Cu50 Stainless Steel Waterproof Temperature Sensor Probe Thermocouple Platinum Resistance OEM

Free online consultation

Our staff will contact you within 24 hours (on business days). If you require additional assistance, please call our service hotline at 137-9451-4154 (Ms. Jiang).