News Center
Release time:2022-07-28
What are the types of temperature sensors?
Temperature sensors can be classified according to various reference criteria. For example, based on the output signal, they can be categorized into current‑type, voltage‑type, resistance‑type, and digital‑signal types; resistance‑type sensors further subdivide into positive‑temperature‑coefficient (PTC) and negative‑temperature‑coefficient (NTC) types. They can also be classified by accuracy as standard‑accuracy or high‑accuracy. According to the measured temperature range, they are divided into general‑purpose, high‑temperature, and low‑temperature categories—where “high” and “low” refer to the sensor’s long‑term operating temperature. The HX‑RS low‑temperature series, for instance, can operate continuously at temperatures as low as −200°C.
28
2022-07
Release time:2022-07-27
What is the definition of an NTC thermistor temperature sensor?
NTC thermistors and probe assemblies: a finished thermistor assembly consisting of a thermistor housing, extended leads, and sometimes an additional connector. Huizhou Jinyuanxiang Electronics Co., Ltd. specializes in manufacturing temperature sensors.
27
2022-07
Release time:2022-07-27
What is the principle behind a temperature and humidity sensor?
A temperature and humidity sensor is a device that measures both temperature and relative humidity. Typically, “humidity” refers to relative humidity, which is the ratio of the absolute humidity at the current temperature to the saturation humidity at that same temperature. As such, humidity measurement is inherently dependent on temperature; any inaccuracies in temperature sensing can adversely affect humidity readings. Therefore, when selecting a temperature and humidity sensor, particular attention should be paid to its temperature‑measurement accuracy. Temperature and humidity range: −40°C to 85°C.
27
2022-07
Release time:2022-07-27
What are the application scenarios for temperature and humidity sensors?
Temperature and humidity sensors integrate temperature and humidity measurement into a single unit. Depending on the specific environmental conditions, different types of sensors are required. When selecting a sensor, it is essential to identify the object being measured and the desired measurement range, which typically spans from –40°C to 85°C.
27
2022-07
Release time:2022-07-20
What types of temperature sensors are used in ovens?
Typically, built-in ovens use NTC temperature sensors because precise temperature control is essential for ensuring the optimal flavor of food.
20
2022-07
Contact Us
+86-137 9451 4154(Miss Jiang)
Add: Room 01, 8th Floor, 3rd Building, Daya Bay KeChuang Huizhou Software Park, No. 28, Longshan 2nd Road, Daya Bay West District, Huizhou, China
Wechat / Whatsapp / Telegram:
Scan with WeChat
Power by:www.300.cn
